This $125 1x2 SDI DA is a professional distribution amplifier for HD-SDI signals. It takes one input, with re-clocking and equalization, and distributes the signal to two identical SDI outputs for real-time multi-viewing.
Why pay hundreds more from Brand AJ... and Brand BL.. when you can get the professional 1x2 SDI DA for only $130 with the outstanding specs below...
1x2 SDI DA Features:
- SDI Formats: HD-SDI and SD-SDI (No 3G)
- Data Rates: 270Mbps/1.485 Gbps
- Two separately buffered outputs
- Cable equalization (Belden 1694A) retiming and signal
- Re-clocking function capability? unlimited repeater connection
- Dual color LED indication of power and video signal link
- Passes all ancillary data
- HDTV Compatible
- Multi-Standard Operation - SDI (SMPTE 259M/344M) & HD-SDI (SMPTE 292M)
Outstanding Eye Pattern Characteristics (See More Pictures TAB):
- Amplitude: Within 800mV±3% (<10%)
- Rise overshoot: Less than 2% (<10%)
- Fall overshoot: Less than 2% (<10%)
- Long time jitter: 0.195 UI (<1.0 UI)
The 1x2 SDI DA is an HD/SD SDI one input and 2-output DA (distribution amp) that can send SDI video to 200 feet of quality video cable (RG6/U).
Why not buy this 1x2 SDI DA today?
The 1x2 SDI DA or SD/HD-SDI Distribution Amplifier is a 1 to 2 repeater and distribution amplifier with a Re-clocking function. It receives one SDI input and perfectly duplicates it.
1x2 SDI DA Specs:
- INPUT: 1 SMPTE-259M/292M/344M SDI, 75Ω on a BNC connector
- OUTPUTS: 2 equalized and re-clocked SMPTE-259M / 292M / 344M outputs
- Connectors: BNC connectors
- MAXIMUM DATA RATE: 1.485Gbps
- MAX. OUTPUT LEVEL: 800mVpp
- AC POWER SOURCE: 12V DC, 250mA
- DIMENSIONS: 84*48*25mm( W, D, H)
- Includes a Power supply
Why not buy this 1x2 SDI Distribution Amp today?
This 1x2 SDI DA can be used in post-production setups, digital cinema, TV studios, or other SDI applications where you need to split and extend from an SDI camera, or other device, equipped with SDI outputs to two SDI displays or video processing units.
Q: Does this 1x2 SDI DA support 3G?
A: No, only SDI and HD-SDI so see our 3G 1x2 SDI DA.
Q: What do you recommend for the best cable for this 1x2 SDI DA?
A: Start with good cabling. To send HD video you must use a coaxial cable with a Bandwidth of at least 1.5G and to send Full HD video must use a coaxial cable with a bandwidth of at least 3G. The link cable recommended using a high-quality Coaxial Cable & BNC connector if you use a low-quality coaxial cable it may cause signal loss and affect the transmission distance and reliability.
BNC coax cables and connectors are not all made to the same standard. From the thickness and grade of the center conductor to the type of dielectric, all these factors contribute to impedance, attenuation, and Return Loss. Serial Digital Video coaxes like Belden 1694A or Canare L5CFB are good examples of broadcast-quality SDI cable. A 75 Ohm impedance must be maintained throughout the 1x2 SDI DA signal or cable path including BNC connectors etc.
Here is a distance and cable type guide that can be used with this converter: // Popup window code function newPopup(URL) { popupWindow = window.open( url,'popUpWindow','height=700,width=800,left=10,top=10,resizable=yes,scrollbars=yes,toolbar=yes,menubar=no,location=no,directories=no,status=yes') } Recommended Transmission Distances.
