4K WolfPack 3G SDI 8x8 Matrix with Reclock function is Distribute up to eight SDI video signals to up to eight locations. This matrix features eight SDI inputs and eight SDI outputs with the ability to route any input to any or all outputs. It supports long SDI cable runs (up to 100m for 3G mode) and data rates from 270Mbps to 2.97Gbps. The outputs are reclocked with support for multiple slopes.
The matrix is compatible with HDcctv 1.0, HD-SDI (ST 292), 3G-SDI (ST 424), and SD-SDI (ST 259). It includes RS232 serial, infrared remote, and front panel control options. It also includes an infrared remote control and an IR extender. The video outputs are reclocked.
4K WolfPack 3G SDI 8x8 Matrix with Reclock function Features:
- Eight SDI video inputs and eight SDI video outputs
- Route any source to any output
- Supports multiple video resolutions (480i, 525i, 625i, 720p @24/25/30/50/60Hz, 1080i @50/60Hz, 1080p @24/25/30Hz, 1080p @50/60Hz
- Supports multiple color spaces (RGB sampled, YCbCr 4:4:4 sampled, YCbCr 4:2:2 sampled, YCbCr 4:2:0 sampled)
- Supports data rates from 270Mbps to 2.97Gbps
- Supports 8-bit, 10-bit, and 12-bit Deep Color
- Compatible with HDcctv 1.0, HD-SDI (ST 292), 3G-SDI (ST 424), and SD-SDI (ST 259)
- Supports long SDI input cable runs (up to 320m for SD mode, 220m for HD mode, and 100m for 3G mode)
- Supports long SDI output cable runs (up to 300m for SD mode, 200m for HD mode, and 100m for 3G mode)
- SDI outputs are reclocked and support multiple slopes
- Includes RS232 control input
- Includes infrared remote control
- Features an IR extender so you can use the remote control without having the matrix exposed
Why not buy buy this 4K WolfPack 3G SDI 8x8 Matrix with Reclock function today?
4K WolfPack 3G SDI 8x8 Matrix with Reclock function
| Specifications | |
|---|---|
| Input Connectors | 8x SDI BNC (female) 1x 9-pin RS232 Serial (female) |
| Output Connectors | 8x SDI BNC (female) |
| Maximum Resolution | 1920 x 1080p @50/60 Hz |
| Deep Color Support | 8-, 10-, and 12-bits/channel |
| Supported Color Spaces | RGB sampled, YCbCr 4:4:4 sampled, YCbCr 4:2:2 sampled, YCbCr 4:2:0 sampled |
| Bandwidth Range | 270Mbps ~ 2.97Gbps |
| Maximum Input SDI Cable Lengths (using RG-6 cable) |
SD (480i) Mode: up to 320m HD (720p 60Hz) Mode: up to 220m 3G (1080p 60Hz) Mode: up to 100m |
| Maximum Output SDI Cable Lengths (using RG-6 cable) |
SD (480i) Mode: up to 300m HD (720p 60Hz) Mode: up to 200m 3G (1080p 60Hz) Mode: up to 100m |
| Input Power | 5.0 VDC, 3A |
| AC Adapter Input Power | 100 ~ 240 VAC, 50/60 Hz, 1.5A |
| Power Consumption | up to 11 watts |
| Power Reverse Polarity Protection | Yes |
| Power Overvoltage Protection | Yes, but voltage must be less than 28V |
| ESD Protection | Contact Discharge: 8kV Air Discharge: 15kV |
| Operating Temperature | +32 ~ +158˚F (0 ~ +70˚C) |
| Operating Humidity | 10 ~ 85% RH (non-condensing) |
| Storage Temperature | +14 ~ +176˚F (-10 ~ +80˚C) |
| Storage Humidity | 5 ~ 90% RH (non-condensing) |
| Dimensions | 13.8" x 6.0" x 1.8" (350 x 152 x 46 mm) |
| Weight | 58.2 oz. (1650g) |
| Regulatory Compliance | FCC, CE, UL |
Q: What protocol does the RS232 control input use?
A: FROM A CUSTOMER: I was able to successfully control this using serialsend.exe. It is a freeware command line tool to send data to the serial port. Here is the syntax I used to send Input 1 to Output A: serialsend.exe /devnum 1 /baudrate 4800 /hex "A1\n" This assumes your serial port is COM1. If it is a different number, put that digit after the devnum argument. I put each command into a batch file and used Autohotkey to execute the batch files in hidden mode. I added a programmable 8 key USB keypad and mapped the hotkeys to it for ease of use.
A: FROM A CUSTOMER: I was able to successfully control this using serialsend.exe. It is a freeware command line tool to send data to the serial port. Here is the syntax I used to send Input 1 to Output A: serialsend.exe /devnum 1 /baudrate 4800 /hex "A1\n" This assumes your serial port is COM1. If it is a different number, put that digit after the devnum argument. I put each command into a batch file and used Autohotkey to execute the batch files in hidden mode. I added a programmable 8 key USB keypad and mapped the hotkeys to it for ease of use.
